Category: Legacy Asterisk
-
RTP pass-through mode in Asterisk
•
What is RTP pass-through mode in Asterisk? The speech for VoIP calls uses RTP (Real Time Protocol) to get from one end to the other and it is compressed using one of the many speech compression codecs available. Commonly used codecs include G.711 and G.729. When you call someone through an Asterisk PBX, there will be […]
-
How can an Asterisk IP-PBX benefit my business?
•
In a Nutshell: The benefits of upgrading to an Asterisk based IP-PBX
-
SIP Subscribe/Notify and Asterisk Hints Explained
•
The SIP SUBSCRIBE/NOTIFY mechanism – what it is and how it works The SIP protocol includes a standardised mechanism to allow any SIP client (an IP phone being an example of a SIP client) to monitor the state of another device. Details are provided in the SIP protocol document RFC 3265. Basically, it works like […]
-
Configuring and Using SIP Domains in Asterisk
•
What are SIP Domains? SIP requests delivered to a Proxy server or other SIP device must contain details of valid destinations and end-points that are to be reached or which are to receive responses. The address of a SIP device is generally referred to as its URI (Uniform Resource Identifier) – it has to uniquely […]
-
Asterisk SLA (Shared Line Appearances) – Part 4
•
Link to part 3 What is good and what is bad about the Asterisk implementation of SLA? Benefits of Asterisk Shared Line Appearances Replacement of legacy systems: The main reason for wanting to configure Shared Line Appearances in Asterisk is because the Asterisk system is replacing a traditional key and lamp telephone system. However, this […]
-
Asterisk SLA (Shared Line Appearances) – Part 3
•
Link to part 2 EXTENSIONS.CONF: Setting the Hints used by SLA The SIP SUBSCRIBE/NOTIFY mechanism – what it is and how it works The SIP protocol includes a standardised mechanism to allow any SIP client (an IP phone being an example of a SIP client) to monitor the state of another device. Details are provided […]
-
Asterisk SLA (Shared Line Appearances) – Part 2
•
Link to part 1 About the examples and conf file samples used in this article The following sections will guide you through the setup of a small Asterisk system using shared line appearances. Each step is explained to show how it works. The dial plan examples will start with a fairly simple configuration and we […]
-
Asterisk SLA (Shared Line Appearances) – Part 1
•
Terminology and SLA Concepts Terminology We have attempted to use the correct terminology (as recognised throughout the telephony industry) within the explanations on this web page. However, as it is so important to be clear about the meaning of the terminology used here, it seemed like a good idea to set it out explicitly at […]
-
Why bother with SLA on Asterisk?
•
Familiarity There are, in the business world, a huge number of legacy telephone systems that use a “key and lamp” principle of operation – so-called key telephone systems. Many small business phone systems available in the market today still use this principle of operation. They are extremely ubiquitous and a large number of users and […]
